Η εργασία αυτή περιγράφει ένα νέο διαχωριστή ισχύος Wilkinson σε μια μικροταινιακή γραμμή, μονής στρώσης, που μπορεί να μειώσει την κατεχόμενη περιοχή, να καταστείλει τις αρμονικές συνιστώσες, και / ή να παρέχει τις αυθαίρετες αναλογίες κατανομής ισχύος. Αποτελείται από γραμμές μεταφοράς δύο τμημάτων, δυο πηνία, και μία αντίσταση απομόνωσης. Πέντε διαφορετικοί σχεδιασμοί έχουν διεξαχθεί για να διερευνήσουν τις δυνατότητες της δομής.
Το κείμενο είναι διαρθρωμένο σε τέσσερα κεφάλαια. Στο πρώτο κεφάλαιο γίνεται μια ανασκόπηση των διαιρετών ισχύος. Αρχικά, κάνουμε μία εισαγωγή στα μικροκύματα, κάνοντας εκτενέστερη αναφορά στους διαιρέτες ισχύος, δίνοντας ιδιαίτερη έμφαση στον διαιρέτη ισχύος Wilkinson, τον οποίο πραγματευόμαστε σε όλη την έκταση της πτυχιακής εργασίας.
Έπειτα, στο δεύτερο κεφάλαιο, λαμβάνει χώρα η μαθηματική ανάλυση των εξισώσεων του συμπαγούς διαιρέτη ισχύος
Στο τρίτο κεφάλαιο, γίνεται ο σχεδιασμός του συμπαγούς διαιρέτη ισχύος Wilkinson με καταστολή αρμονικών και αυθαίρετο λόγο κατανομής ισχύος. Για το λόγο αυτό, αναλύονται πέντε παραδείγματα, τα δύο με ίση κατανομή και τα υπόλοιπα τρία με άνιση κατανομή ισχύος.
Τέλος, στο τέταρτο κεφάλαιο παρατίθενται τα τελικά συμπεράσματα που αποκομίσαμε από την πειραματική διαδικασία της πτυχιακής αυτής, όπως επίσης και προτάσεις για μελλοντική εργασία.
This thesis describes a new Wilkinson power divider on a single-layer microstrip line that can reduce the occupied area, suppress the harmonic components, and/or provide the arbitrary power division ratios. It consists of two-section transmission lines, two inductors, and one isolation resistor. Five different designs have been conducted to investigate the capabilities of the structure.
The document is comprised of four chapters. The first chapter is an examination of power dividers. Initially, we make an introduction in the microwaves, making more extensive report on power dividers, giving particular emphasis on Wilkinson power divider that we worked on all the extent of this thesis.
Then, in the second chapter takes place the mathematical analysis of the equations of compact microstrip Wilkinson power divider.
In the third chapter we design the compact microstrip Wilkinson power divider with harmonic suppression and arbitrary power division ratios. For this reason, five examples are analyzed, two of them with equal power division and the other three with unequal power division.
Finally, in the fourth chapter are mentioned the final conclusions that we acquired from the experimental process of this thesis and also suggestions for future research.